Enquiry

ANSI/ ASME B16.9 Piggable Bend

Long Radius Piggable Bend suppliers , Stainless Steel Piggable Bend manufacturer in India

Stainless Steel Piggable Bend Manufacturer in India

Stainless Steel Piggable Bend Manufacturer in India

Long Radius Piggable Bend

Long Radius Piggable Bend

ASME B16.9 Piggable Pipe Bend Stockist in Mumbai

ASME B16.9 Piggable Pipe Bend Stockist in Mumbai

Manufacturer of Steel Piggable Pipe Bend, ASME B16.25, ANSI B19.28, MSS-SP-43 Piggable Bends Price in India, Short Radius Piggable Bend stockist in Mumbai, India.

Table of Content

 


What is ASME B16.9 Piggable Bend ?


ASME B16.9 Piggable Bend Suppliers in India

ASME B16.9 Piggable Bend Suppliers in India


Specification of ASME B16.49 Piggable Radius Bend


Manufacturer of Stainless Steel Long Radius Piggable Bend, ANSI B16.9 Butt Weld Piggable Radius Bend in India. Nickel Alloy 200 Piggable Bends & ASME B16.9 Short Radius Piggable Bend suppliers in Mumbai, India

Piggable Bend manufacturers in India

Are you looking for Piggable Bend manufacturers in India? Manufacturer of Piggable Bend in Mumbai, India, Buy Piggable Radius Bend & Piggable Pipe Bend with or without tangents at best price.

Remember following points while producing Piggable Bend :

  • Piggable Bend surface must be free of cracks [ASME B31.5 §529.1]
  • Piggable Radius Bend surface must be free of buckles [ASME B31.5 §529.1]
  • The minimum thickness after Piggable Pipe Bend bending must not be less than as required for straight pipe [ASME B31.5 §504.2.1]
  • Either hot or cold methods can be used to bend the pipe [ASME B31.5 §529.2]
  • If Heat Treatment is used to produce Short Radius Piggable Bend, it must be performed in accordance with the requirements of ASME B31.5

Check Piggable 5D Bend Price List, Piggable bend radius exporter in India, ASME B16.9 Piggable Pipe Bends manufacturers in Rajkot, Gujarat, ANSI B16.9 Piggable Bend supplier.


Piggable Bend Dimensions ASME/ ANSI B16.9, ASME/ ANSI B16.49 / ASME/ ANSI B16.28, MSS-SP-75, MSS SP-43, DIN 2605, GOST 17375, GOST 30753, ISO 15590-1, EN 10253-4 Type A, EN 10253-4 Type B
Piggable Bend Size
  • Seamless Pipe Bends (1/2" - 24")
  • ERW / Welded / Fabricated Pipe Bends (2" - 36")
  • Seamless: DN50-DN1200
  • Welded: DN50-DN1200
  • 2NB - 100NB (4 Inch)
Outer Diameter 38.0 mm - 206.0 mm
Wall Thickness 1.5 mm / 2.0 mm / 3.0 mm - greater wall thickness at request
Bend Radii 75 / 100 / 150 / 250 / 300 / 500 / 800 / 1,000 / 1,200 / 1,500 mm
Bending radius (R) R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom Piggable Bend
Radius & Bending angle (θ) 15°, 30°, 45°, 60°, 90°, 135°, 180° Elbow
End ASME B16.9 / B16.49; BE
Type Seamless / ERW / Welded / Fabricated Piggable Bend Stockholder
Connect method Butt welding
Piggable Bend manufacturing technique Induction
Thickness Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XS, XXS etc.
Finish Finished pickled, 2b finish, #8 finish, 180 grit finish, #4 finish ra
Bending set R300, R50
Certification ASME, ANSI, DIN, JIS, BS, API, Ce, En
Stockyard locations
  • Dubai, UAE
  • Edmonton, Canada
  • Houston, Texas
  • Sheffield, England
  • Singapore
  • Chennai & Mumbai, India
Facilities for Piggable Bend
  • Welding machines (TIG, MIG, SAW, ARC, Induction Heating )
  • CNC Tube bending
  • Plate Bending machine
  • EOT Crane
  • Rotators, Oscillators
  • Drilling, Milling, Lathe
  • Automatic Shot Blasting Unit
  • Cutting M/c, PLASMA Cutting M/c, Beveling,
  • Diesel Power Generators
  • Hydra Mobile crane
  • PMI M/c
Piggable Bend Testing Facility
  • Radiography (X-Ray, Gamma-Ray)
  • UT, MT, LPI, MP
  • Hydraulic
  • Hardness
Third Party Inspection
  • Indian Boiler Regulations
  • Bureau Veritas
  • National Thermal power corporation
  • Lloyd’s Registerof Inspection Services
  • Indian Register of Shipping
  • Tata Consultancy
  • Nuclear Power Corporation
Standard radius Ø20 - Ø28mm, CLR = 2.0 X diameter
Ø26.9 - Ø168.3, CLR = 2.5 X diameter
Ø76.1 – Ø168.3 Bauart 5
Ø219.1 – Ø508 Bauart 5
Mill specification MESC SPE 74/002 2018 , MESC SPE 76/200 2018, EN 10204 -3.1, ISO 10474 -3.1 Piggable Bend Exporter

Price list of ASME B16.9 Piggable Bend manufacturers in India


Carbon steel Piggable Bend Type ASME B16.49 Piggable Radius Bend Price in India Piggable Pipe Bend Price in Saudi Riyal Alloy Steel Piggable Bend Price in UAE Dirham
Stainless Steel Piggable Bend INR 356.50 SAR 18.75 AED 18.37
Low Temperature carbon Steel Piggable Bend INR 570.40 SAR 30.01 AED 29.38
Inconel Piggable Bend INR 702.31 SAR 36.95 AED 36.18
Duplex Stainless Steel Piggable Bend INR 884.13 SAR 46.51 AED 45.55

Please note this is an approx Price of ASTM A403 SS Seamless Piggable Radius Bend in India. For final Alloy 20 Piggable Bend price in India please mail us.

Stainless Steel Piggable Bend


ASTM A403 WP304 ASTM A403 WP310 ASTM A403 WP347H
ASTM A403 WP304L ASTM A403 WP317 ASTM A403 WP321
ASTM A403 WP316 ASTM A403 WP317L ASTM A403 WP347
ASTM A403 WP316L ASTM A403 WP310S ASTM A403 Gr WP 321H

Carbon Steel Piggable Bend


ASTM A53 GR.B Piggable Bend ASTM A420 WPL3 Piggable Bend A515 GR 70 Piggable Bend
ASTM A106 GR. A Piggable Bend ASTM A420 WPL6 Piggable Bend A516 GR.60 Piggable Bend
ASTM A106 GR. B Piggable Bend A515 GR 60 Piggable Bend A516 GR.70 Piggable Bend
S235JR Piggable Bend ASTM A234 WPB Piggable Bend Din 2633 c22.8 Piggable Bend
P235GH Piggable Bend DIN 2391 ST 52 Piggable Bend ASTM A333 Gr 6 Piggable Bend
A860 WPHY42/46/52/56/60/70/80 ST37.0 ST35.8, ST45.8
API 5L Piggable Bend Ductile Iron Piggable Bend GI Piggable Bend

Alloy Steel Piggable Bend


A234 WP5 Piggable Bend A234 WP11 Piggable Bend A234 WP9 Cl1 Piggable Bend
A234 WP9 Piggable Bend A234 WP22 Piggable Bend A234 WP91 Piggable Bend
MS Piggable Bend    

Piggable Bending material


We manufacture Piggable Bend in steel grades to EN, ASTM, ANSI and AISI standards. Stockholder of Steel Piggable Bend standards: EN10217-1, EN10217-2, EN10217-3, EN10217-7, EN10216-2, EN10216-3, EN10216-4, EN10216-5, EN10208-2.

Carbon Steel Piggable Bend
  • High Yield CS Piggable Bend Traders
  • ASTM A234, ASME SA234 WPBW Piggable Bend Stockholder
  • ASTM/ ASME SA 234 WPB Piggable Bend Stockist
High Strength Ferritic Steel Piggable Bend

ASTM/ ASME SA 860 WPHY 42, WPHY 46, WPHY 52, WPHY 60, WPHY 65, WPHY 70 Piggable Bend
Low Temp Carbon Steel Piggable Bend ASTM A420 WPL3, A420 WPL6 Piggable Bend
Stainless Steel Piggable Bend
  • ASTM/ASME SA403 WP 304, WP 304L, WP 304H, WP 304LN, WP 304N,
  • ASTM/ASME A403 WP 316, WP 316L, WP 316H, WP 316LN, WP 316N, WP 316Ti,
  • ASTM/ASME A403 WP 321, WP 321H
  • ASTM/ASME A403 WP 347, WP 347H

ASTM A403 WP316/316L, ASTM A403 SA / A 774 WP-S, WP-W, WP-WX 304/304L, ASTM A182 F316L, 304L, DIN 1.4301, DIN1.4306, DIN 1.4401, DIN 1.4404, ASTM/ASME A/SA351 CF8, CF3, CF8M, CF3M, DIN 1.4301, DIN 1.4306, DIN 1.4401, DIN 1.4404, DIN 1.4308, DIN 1.4408, DIN 1.4306, DIN 1.4409, EN1.4301, EN1.4307, EN1.4404, EN1.4432, EN1.4435, EN1.4541, EN1.4571, ANSI 304, ANSI 304L, ANSI 316, ANSI 316L, ANSI 316TI, Sandvik SAF, F904L/ UNS N08904
Low Alloy Steel Piggable Bend ASTM/ ASME SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91 Piggable Bend
Black Steel Piggable Bend P235GH, P235TR1, P235TR2, P265GH, P355N, P195GH, 16Mo3, L360NB, L360MB Piggable Bend
API 5L Piggable Bend
  • API 5L - Gr.B / X42 / X46 / X52 / X60 / X70 / X80 / X100 / X120 Piggable Bend (PSL1 & PSL2)
  • ISO 3183- L245 / L290 / L320 / L360 / L415 / L485 Piggable Bend (PSL1)
  • ISO 3183- L245N / L245R / L290Q / L360Q / L415Q / L485Q Piggable Bend (PSL2) (Seamless)
  • Specification: API 5L: ISO 3183: 2007
  • Pipeline Design Code: ASME B31.4 / ASME B31.8 / ASME B16.49/ MSS-SP75
  • B31.8 Gas Transmission and Distribution
  • B31.4 Pipeline Transportation Systems
  • Composition: API 5L: ISO 3183: 2007, Sour Tests Cab Be Chosed.
  • Required, per API 5L: ISO 3183: 2007, ASTM A370
  • Dimensional Tolerance: +/-1 degree
  • Surface: 3-Layers Polyethylene / Fusion Bonded Epoxy (FBE)
  • Number of Qualification Bends: Per section API 5L: ISO 3183
Titanium Piggable Bend
  • ASTM B381 / ASME SB381, Titanium Gr. 1, Titanium Gr. 2, Titanium Gr. 4, Titanium Gr. 5, Titanium Gr. 7 Piggable Bend
  • ASTM R50250/GR.1 | R50400/GR.2 | R50550/GR.3 | R50700/GR.4 | GR.6 | R52400/GR.7 | R53400/GR.12 | R56320/GR.9 |R56400/GR.5
  • ASTM/ ASME SB337 Grade 1, Grade 2, Grade 11, Grade 12 Piggable Bend
  • Check latest Titanium Pipe Bends price in India
Copper Piggable Bend T1, T2, C10100, C10200, C10300, C10400, C10500, C10700, C10800, C10910,C10920, TP1, TP2, C10930, C11000, C11300, C11400, C11500, C11600, C12000,C12200, C12300, TU1, TU2, C12500, C14200, C14420, C14500, C14510, C14520, C14530, C17200, C19200, C21000, C23000, C26000, C27000, C27400, C28000, C33000, C33200, C37000, C44300, C44400, C44500, C60800, C63020, C68700, C70400, C70600, C70620, C71000, C71500, C71520, C71640, etc, click here for Copper Pipe Bends ready stock
Copper Nickel Piggable Bend (Cu Ni Alloy)
  • ASTM / ASME SB 61 / 62 / 151 / 152, Copper Nickel 90/10 Piggable Bend (C70600 ), Cupro Nickel 70/30 Piggable Bend (C71500), UNS C71640 Piggable Bend
  • ASTM/ASME SB 466 UNS C70600 Cu/Ni 90/10 Piggable Bend
  • CuNi10Fe1Mn, CuNi30Mn1Fe
Brass Piggable Bend 3602 / 2604 / H59 / H62 Piggable Bend etc.
Inconel Piggable Bend ASTM B336, ASME SB336, Inconel Alloy 600 (UNS N06600), 601, 625 (UNS N06625), 718, 783, 690, x750, Alloy 31/ UNS N08031 Piggable Bend
Hastelloy Piggable Bend ASTM B336, ASME SB336, Hastelloy C276 (UNS N10276), C22 (UNS N06022), C4, C2000 (UNS N06200), B2, B3, X Piggable Bend
Alloy 20 Piggable Bend ASTM B336, ASME SB336, Carpenter® 20 Alloy, Alloy 20 (UNS N08020), Alloy 20Cb-3 Piggable Bend
Aluminium Piggable Bend 5052 /6061/ 6063 / 2017 / 7075 Piggable Bend etc., click here for more information about Aluminium Tube Bends
Nickel Piggable Bend ASTM B336, ASME SB336, Nickel 200, Nickel 201, Nickel 205, Nickel 205LC Piggable Bend
Monel Piggable Bend ASTM B336, ASME SB336, Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500) Piggable Bend
Duplex Piggable Bend
  • UNS S31803 / S32205 A815 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61 Piggable Bend
  • ASTM A 815 /ASME SA 815 WP S31803, WP S32205, WP S32750, WP S32760, WP S32550 Piggable Bend
  • Werkstoff No. 1.4462
Super Duplex Piggable Bend UNS S32750 / S32760 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61 Piggable Bend
Incoloy Piggable Bend ASTM B336, ASME SB336, Incoloy Alloy 800 (UNS N08800), 800H (UNS N08810), 800HT (UNS N08811), 825 (UNS N08825), 925 (UNS N09925) Piggable Bend
254 Smo Piggable Bend ASTM A403 / ASME SA403, SMO 254/6Mo, UNS S31254, DIN 1.4547 Piggable Bend
Nimonic Piggable Bend Nickel Alloy Nimonic 75, Nimonic 80A (UNS N07080), Nimonic 90 Piggable Bend
Galvanised Pipe Bends Galvanized Piggable Bend, GI Piggable Radius Bend, Galvanised Malleable Iron Piggable Pipe Bend
Other Piggable Bend material Tin bronze, Alumunum bronze, Lead bronze Piggable Bend

Types of Buttweld Piggable Bend


Buy from specialized Duplex Steel Piggable Bend manufacturers in India. Over 2000 Stainless steel Piggable Radius Bend, Carbon steel Piggable Pipe Bend, Inconel Piggable Bends & Hastelloy C22 Short Radius Piggable Bend variants in bulk stock.

Buttweld Piggable Bend Butt Weld Piggable Radius Bend
ASME B16.9 Piggable Bend A420 WPL6 Piggable Bend
Stainless Steel Piggable Bend Aluminum Piggable Bend
ANSI B16.9 Piggable Radius Bend ASME B16.28 Buttweld Piggable Bend
Welded Piggable Bend Seamless Piggable Bend
Titanium Piggable Bend Inconel Butt weld Piggable Bend
Carbon Steel Piggable Bends ASME B16.49 Piggable Bend
ASTM A403 Stainless Steel Piggable Bends Duplex Steel Piggable Bends
Super Duplex Steel Piggable Bend Copper Nickel Piggable Bends
High Nickel Alloy Piggable Bend Hastelloy Piggable Bend
Copper Piggable Bend SS Piggable Bends
Piggable Bend Carbon Steel Piggable Bend
Buttweld Piggable Bend Piggable Pipe Bend
Seamless Piggable Bend ASME B16.9 Piggable Pipe Bends
Welded Piggable Bend 90 Degree Piggable Bend
Stainless Steel Piggable Bend Carbon steel piggable bending pipe
90 Degree Piggable Bend, 45 degree Piggable Pipe Bend stockholder, Piggable Pipe Bending manufacturers, Carbon steel piggable bends wholesaler in Mumbai, ASTM A403 SS Piggable Bends suppliers in India.

Prestige quality ASTM A403 SS Piggable Pipe Bend manufacturers in India offer these Alloy Steel Piggable Radius Bend in DIN, EN, BS, ISO, JIS or ANSI standard. Excel Metal is an PED certified Monel Long Radius Piggable Bend manufacturer & distributor in India

16 Gauge Piggable Bend Radius


Gauge Piggable Bend Radius
Includes Minimum Closeness of Cutout to Bend		 Piggable Bend Radius
(Refers to Inner Radius)
11 gauge (0.120" |3.05mm) .5" .07", .08", .09", .1", .125"
14 gauge (0.075" | 1.9 mm) .275" .05", .055", .062", .07", .075"
.375" .07", .105"
.5" .09", .11", .115", .12"
1.375" .4"
16 gauge (0.060" | 1.52 mm) .2" .035", .05"
.265" .05", .055", .075", .08"
.375" .07"
.5" .105", .12"
18 gauge (0.048" | 1.22 mm) .2" .04", .045", .05"
.265" .06", .07", .08", .085"
.375" .1", .125"
.5" .115", .12"
20 gauge (0.035" | 0.89 mm) .2" .05"
.265" .06", .07"
.375" .095"
22 gauge (0.029" | 0.74 mm) .2" .05"
.265" .04", .08"
24 gauge (0.024" | 0.61 mm) .2" .04"
.265" .08"
Difference between Piggable Bend & Piggable elbow

  • Piggable Bend used for long distance transition requirements & consist of 3D, 5D, 7D and 12D series
  • ANSI/ ASME B16.9 is standard specification for Buttweld Piggable Elbow
  • Piggable Bend have a radius more than twice the diameter, and Piggable elbows have a radius of curvature between one and two times the size of the pipe’s diameter.
  • Piggable Elbows have limitations to angle, bend radius and size while Piggable Bend radius are 2.5D, 3D, 5D, 7D or 8D, but it can be any other bending radius according to the customer requirements
  • We can say that all Piggable elbows are Piggable Bend, but not all Piggable Bend are Piggable elbows
  • ANSI/ ASME B16.49 is standard specification for Piggable Bend
  • Piggable elbows have sharp corners, Piggable Bend never do.
  • Pipe bend, Bend pipe, Pipe bending, ANSI, ISO, JIS and DIN Standards, Measures 1/2 to 56 Inches.
  • Schedule 80 Piggable Bend is often used for heavy-duty while schedule 40 Piggable Bend is often used for light-duty.
  • Centerline radius, outside diameter and wall thickness are important variables with Piggable bending methods.

Piggable Bend manufacturing & bending process


  • Induction Bending for Piggable Bend
  • Ram-Type Piggable Bend Bending
  • Piggable Bend Roll Bending
  • Mandrel Bending for Piggable Bend
  • Rotary Draw Bending for Piggable Bend

ASME B16.9 Standard Piggable Bend Radius


Standard Bending radius (R): R=3D, 4D, 5D, 6D, 7D, 8D, 9D, 10D

Our standard radii :

  • Ø26.9 - Ø168.3, CLR = 2.5 X diameter
  • Ø219.1 - Ø508 Bauart 5

Piggable Bend Radius (Bend radii) and Minimum Bend Radius are limited as mentiond in below table, It is determined by the equipment and tooling combinations available to the Piggable Bend manufacturer

Piggable Bend radius chart

Standard pipe Spec . Bauart 5 2,5D
DN Diameter [ØD] CLR CLR CLR
20 26,9 110   67
25 33,7 110   84
32 42,4 110   106
40 48,3 110   212
50 60,3 125   151
65 76,1   175 190
80 88,9   205 222
100 114,3   270 286
125 139,7   330 350
150 168,3   390 421
200 219,1   510  
250 273   650  
300 323,9   775  
350 355,6   850  
400 406,4   970  
500 508   1245  

Piggable Bend Material thickness from 1.5 to 12.5 mm - in some cases up to 20 mm. CLR = Centre Line Radius for bend.

Nominal pipe size Outside Diameter at Bevel Center to End
D C M
DN INCH Series A Series B
15 1/2 21.3 18 25
20 3/4 26.9 25 29
25 1 33.7 32 38
32 11/4 42.4 38 48
40 11/2 48.3 45 57
50 2 60.3 57 64
65 21/2 76.1(73) 76 76
80 3 88.9 89 86
90 31/2 101.6 ― 95
100 4 114.3 108 105
125 5 139.7 133 124
150 6 168.3 159 143
200 8 219.1 219 178
250 10 273.0 273 216
300 12 323.9 325 254
350 14 355.6 377 279
400 16 406.4 426 305
450 18 457.2 478 343
500 20 508.0 529 381
550 22 559 ― 419
600 24 610 630 432
650 26 660 ― 495
700 28 711 720 521
750 30 762 ― 559
800 32 813 820 597
850 34 864 ― 635
900 36 914 920 673
950 38 965 ― 711
1000 40 1016 1020 749
1050 42 1067 ― 762 711
1100 44 1118 1120 813 762
1150 46 1168 ― 851 800
1200 48 1220 1220 889 838

Client Reference list :


Zuluf Field Expansion Project

Zuluf Field Expansion Project,
Arabian Gulf, Offshore Saudi Arabia (KSA)


Abu Dhabi Gas Distribution Network Pipeline Project

Abu Dhabi Gas Distribution Network Pipeline Project,
Abu Dhabi, United Arab Emirates (UAE)


Ennore Petrochemical Cluster Project

Ennore Petrochemical Cluster Project (India), Chennai, India


Ophir Oil Field Development

Ophir Oil Field Development,
Offshore Peninsular, Malaysia


Bahrain Deep Gas Exploration Project

Bahrain Deep Gas Exploration Project, Manama, Bahrain


Al-Zour New Refinery Project

Al-Zour New Refinery Project,
Zour, Kuwait


KrisEnergy’s Cambodia Oil Project

KrisEnergy’s Cambodia Oil Project,
Cambodia, Thailand


Dung Quat Refinery Project

Dung Quat Refinery Project,
Quang Ngai, Vietnam


Chevron Indonesia Deepwater Development Project

Chevron Indonesia Deepwater Development Project,
Jakarta, Indonesia


Batangas LNG Terminal

Batangas LNG Terminal, Batangas, Philippines


Khulud Tight Gas Project

Khulud Tight Gas Project,
Yibal, Oman


Bul Hanine Redevelopment

Bul Hanine Redevelopment,
Qatari Coastline, Qatar


Exporter of Piggable 3D Bend, Hastelloy C22 Piggable Bends dealer , Butt Weld Piggable Pipe Bends stockist, Piggable 1D Bend traders, Buttweld Piggable Bends, ANSI/ ASME B16.9 Piggable Bend manufacturers in India.

Manufacturing Welded Piggable Bend in India, Excel Metal holds a wide range of Alloy Steel Seamless Piggable Bend in all Thickness, stock for immediate despatch throughout India & globally.