The Alloy Steel Flanges Manufacturers in India has been designed to meet the needs of pressure ratings such as: 150lb, 300lb, 900lb, 400lb, 1500lb, 2,500lb and 600lb. The grades in which these Alloy Steel Flange Material are available in F9, F22, F11, F5, F91, and F1. These Alloy Steel Pipe Flanges are used to connect valves, pumps, pipes, and other types of equipment, to make a full-fledged piping system. These ASTM A182 Alloy Steel EN 1092-1 Flanges give easy access for modification, inspection and cleaning.
Alloy Steel Flanges Manufacturers in India
Alloy Steel Slip On Flanges
Stockist of Alloy Steel Lap Joint Flange in Mumbai
A Alloy Steel Lap Joint Flange (LJ Flange) is consist of a 2 piece device that is much similar to a A182 Weld Neck Flange but also like a A182 Slip On Flanges. One piece is a sleeve known as "Stub-end" and is formed short of a short piece of pipe with a weld bevel on one finish and a slim shoulder on the opposite end known as the hub. Alloy Steel Industrial Flanges are used in a good vary of industries like pharmaceutical equipment, petrochemicals, gas processing, pharmaceuticals, heat exchangers, condensers, power generation, chemical equipment, seawater treatments, specialty chemicals, food processing, food storage and sea water equipment.
Alloy Steel Slip On Flanges (SO flanges) are designed to slip over the outside of pipe, long-tangent elbows, reducers, and swages. The AS Pipe flange has poor resistance to shock and vibration. It's easier to align than a ASTM A182 WNRF Flanges. This flange is right for low pressure applications since the strength once underneath internal pressure is regarding one third that of a Alloy weld neck flange. Our low alloy steel flanges manufacturers in india are as per ANSI B16.5, ANSI B16.47, B16.48, BS4504, BS 10, EN-1092 standards.
Table of Content
Alloy Steel Flanges Manufacturers in Mumbai have standardized dimensions, which are common all over the globe and these are JIS/KS (Japanese/Korean), ASTM/ASME (USA), BS10 (British/Australian), and PN/DIN (European). Our AS Socket Weld Flanges are initially lower in cost, ease of alignment of the assembly this is the reason it is the most preferred Flange among other Flanges. ANSI B16.5 Alloy Orifice Flanges covers NPS 1/2 inch up to NPS 24 inches, while those AS A182 Blind Flanges with rating class designation 2500 are available in sizes NPS 1/2 inch through NPS 12 inches. Excel Metal is PED & Crisil rated manufacturer and exporter of Alloy Steel ASTM A182 Threaded Flanges, Alloy Steel Lapped joint Flanges (dual marked and certified), ASME B16.5, annealed and fully machined.
ASME B16.5 Alloy Steel Flanges size range | 1/2" (15 NB) to 48" (1200NB) DN10~DN5000 |
---|---|
Alloy Steel Flange Material Standards | ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flanges. |
Standard ANSI | Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS |
Flange supporting material | Gasket, Ring Joint, Flange Bolts |
Alloy Steel Pipe Flanges Standard UNI | 6Bar 10Bar 16Bar 25Bar 40Bar |
AS Pipe Flanges Standard EN | 6Bar 10Bar 16Bar 25Bar 40Bar |
AS Flanges Standard JIS | 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K |
Standard DIN | 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 |
Main Types | Forged / Threaded / Screwed / Plate |
Most common types of Alloy Steel Flanges Manufacturers in India |
|
Alloy Steel Pipe Flanges Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
Production technique |
|
Connect Type/ Flange Face Type | Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, , Groove |
Special design | As per your drawing AS, ANSI, BS, DIN and JIS Alloy Steel Flanges Threaded Flanges, Socketweld Flanges, Slip-On Flanges, Blind Flanges, Weld Neck Flanges |
Test | Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector |
Equipment | Press machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine etc |
Origin | Indian / West Europe / Japan / USA / Korean |
Specialized manufacturer of |
|
Alloy Steel Flanges Standard | ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc.
|
Key markets and industries for Alloy Steel Flanges Manufacturers in India |
|
Export to | India, Egypt, Oman, Dubai, Indonesia, Ukraine, Saudi Arabia, USA, Brazil, Thailand, Korea, Iran, Spain, Canada, Ireland, Singapore, Peru, etc |
Application of Alloy Steel Flange Material |
|
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 |
Alloy Steel Lap Joint Flange Price Per Piece in India | Low Alloy Steel Flanges Price in INR | Alloy Steel Flange Material Price in Saudi Riyal | Alloy Steel Pipe Flanges Price in UAE Dirham |
Flange 4" 150 RF Slip on AS A182 Price in India | Rs. 1314.87 | Saudi Riyal 69.02 | UAE Dirham 67.60 |
Flange 3" 150 RF Threaded AS A182 Price in India | Rs. 1550.69 | Saudi Riyal 81.40 | UAE Dirham 79.72 |
Flange 4" 300 RF Slip on AS A182 Price List | Rs. 1986.60 | Saudi Riyal 104.28 | UAE Dirham 102.13 |
Price of Flange 6" 300 RF Slip on AS A182 in Mumbai | Rs. 2865.57 | Saudi Riyal 150.41 | UAE Dirham 147.32 |
Flange 6" 300 STD RF Weld neck AS A182 Cost in Mumbai | Rs. 3151.41 | Saudi Riyal 165.42 | UAE Dirham 162.02 |
Alloy Steel Socket Weld Flanges
Alloy Steel Spectacle Blind Flanges
Alloy Steel Blind Flanges
Alloy Steel Plate Flanges
Alloy Steel Ring Type Joint Flanges
Alloy Steel Slip On Flanges
Alloy Steel Threaded/ Screwed Flanges
Alloy Steel Lap Joint Flanges
Alloy Steel Long Weld Neck Flanges
Alloy Steel Bleed Ring
Alloy Steel Male and Female Flange
Alloy Steel Reducing Flanges
Alloy Steel Tongue & Groove Flanges
Alloy Steel Weld Neck Flanges
Alloy Steel Forged Flanges
Alloy Steel Raised Face Flanges
Visit our factory and get free sample of Alloy Steel Lap Joint Flange which are available in stock. Prestige quality Alloy Steel Flanges manufacturers in India offer these Alloy Steel Pipe Flange in DIN, JIS, ISO or ANSI standard.
ASME/ANSI B 16.5 | Welding Neck Flange, Slipon Flange, Blind Flange, High Hub Blind Flange, Socket Weld Flange, Lap Joint Flange, Threaded Flange, Ring Type Joint Flange |
---|---|
PRESSURE CLASS | 75, 150, 300, 400, 600, 900 |
BS 4504 SEC 3.1 | Welding Neck Flange, Hubbed Slipon Flange, Hubbed Threaded Flange, Lapped Pipe End Flange, Plate Flange,Loose Plate Flange, Loose Plate With Weld Neck Flange, Blank Flange |
PRESSURE CLASS | 150, 300, 400, 600, 900, 1500, 2500 |
ASME/ANSI B 16.47 | Welding Neck Flange, Blind Flange [Series A & B] |
PRESSURE CLASS | PN 2.5 TO PN 40 |
ASME/ANSI B 16.36 | Welding Neck Flange, Slipon Flange, Threaded Flange |
PRESSURE CLASS | 300, 400, 600, 900, 1500, 2500 |
BS 1560 BOSS | Welding Neck Flange, Socket Welding Flange, Slip-On Flange, Blind Flange,Screwed Boss Flange, Lapped Flange |
PRESSURE CLASS | 150, 300, 400, 600, 900, 1500, 2500 |
BS10 | Welding Neck Flange, Plate Slip-On Flange, Screwed Boss Flange, Slip-On Boss Flange, Blind Flange |
BS 4504[PART 1] | Welding Neck Flange, Hubbed Slip-On Hubbed Threaded, Plate Flange, Loose Plate With Weld On Plate Collar, Blank Flange |
PRESSURE CLASS | PN 2.5 TO PN 400 |
TABLE | D, E, F, H |
PRESSURE CLASS | PN 6 TO PN 100 |
DIN FLANGES | DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673 |
Alloy Steel Flanges Manufacturers in India |
Nominal Pipe Size | Flanges Inside Diameter (ID) (inch) |
Flanges Outside Diameter (OD) (inches) |
||||
Class 150 | Class 300 | Class 400 | Class 600 | Class 900 | ||
1/2 | 0.84 | 1.875 | 2.125 | 2.125 | 2.125 | 2.50 |
3/4 | 1.06 | 2.25 | 2.625 | 2.625 | 2.625 | 2.75 |
1 | 1.31 | 2.625 | 2.875 | 2.875 | 2.875 | 3.125 |
1 1/4 | 1.66 | 3 | 3.25 | 3.25 | 3.25 | 3.50 |
1 1/2 | 1.91 | 3.375 | 3.75 | 3.75 | 3.75 | 3.875 |
2 | 2.38 | 4.125 | 4.375 | 4.375 | 4.375 | 5.625 |
2 1/2 | 2.88 | 4.875 | 5.125 | 5.125 | 5.125 | 6.50 |
3 | 3.50 | 5.375 | 5.875 | 5.875 | 5.875 | 6.625 |
4 | 4.50 | 6.875 | 7.125 | 7.00 | 7.625 | 8.125 |
5 | 5.56 | 7.75 | 8.50 | 8.375 | 9.50 | 9.75 |
6 | 6.62 | 8.75 | 9.875 | 9.75 | 10.50 | 11.375 |
8 | 8.62 | 11 | 12.125 | 12.00 | 12.625 | 14.125 |
10 | 10.75 | 13.375 | 14.25 | 14.125 | 15.75 | 17.125 |
12 | 12.75 | 16.125 | 16.625 | 16.50 | 18.00 | 19.625 |
Dimension Standards | Size Range | Ratings |
---|---|---|
API 6A API 6B Alloy Steel RTJ Flange | 2 1/6" TO 30" | 2000 PSI TO 20000 PSI |
ASME B16.48 / API 590 Alloy Steel Grade Flat Flange | 1/2" TO 24" | 150# TO 2500# |
BS 3293 Alloy steel flange material | 26" TO 48" | 150# TO 600# |
MSS SP 44 alloy steel lap joint flange | 12" TO 60" | 150# to 900# |
ASME/ B16.47/ API 605 ASTM A182 WNRF Flanges | 26" TO 60" | |
ASME/ ANSI/ B16.36 Alloy Steel Lapped joint Flanges | 1" TO 24" | 300# TO 2500# |
ASME/ANSI B16.5 AS Socket Weld Flanges | 1/2" to 24" | 150# to 2500# |
DIN Alloy Steel Slip On Flanges | DN10 TO DN3600 | PN6 TO PN160 |
Product | Size | |
Alloy Steel Slip-On Flanges | Alloy Steel Threaded Flanges | 1/8" – 36" Raised Face or Flat Face |
Alloy Steel Blind Flanges | Alloy Steel Lap Joint Flanges | |
Alloy Steel Plate Flanges | Alloy Steel Reducing Flanges | |
Alloy Steel Weld Neck Flanges | Alloy Steel Socket Weld Flanges |
Excel Metal & Engg. Industries is a distributor and stockist of Alloy Steel Flange Material offering in all Ratings up to 2500#, built a distribution network with more then 60 countries globally. We hold a wide range of Low Alloy Steel Lap Joint Flanges in stock for immediate despatch throughout India & globally.
Property | Values |
Ultimate Tensile Strength * | 95 min Ksi (655 Mpa) |
0.2 % Yield Strength * | 75 min Ksi (517 Mpa) |
Elongation * | 17 % min |
Reduction of Area * | 35 % min |
Charpy Impact Toughness | 42 mean/ 33 min J at –18o C |
Hardness | 197 – 237 BHN (75 Ksi min) |
Element | Weight % |
Carbon | 0.08 – 0.15 |
Silicon | 0.15 – 0.50 |
Manganese | 0.30 – 0.60 |
Phosphorus | 0.025 max * |
Sulphur | 0.025 max * |
Molybdenum | 0.90 – 1.10 |
Chromium | 2.00 – 2.50 |
Nickel | 0.5 max |
AS A182 Blind Flanges | Alloy Steel ASTM A182 Threaded Flanges |
AS Socket Weld Flanges | Alloy Steel Lapped joint Flanges |
ANSI B16.5, B16.47, B16.48 Alloy Steel Forged Flanges | A182 Chrome Moly Plate Flange |
alloy steel flange material | alloy steel lap joint flange |
ASTM A182 WNRF Flanges | Alloy Steel Industrial Flanges |
Alloy Steel Grade Flat Flange | ASTM A182 Alloy Steel EN 1092-1 Flanges |
Alloy Steel RTJ Flange | ASME SA182M Alloy Steel Class 300 Flange |
ASTM A182 Alloy Steel Pipe Flanges | Alloy Steel Slip On Flanges |
A182 Weld Neck Flange | ANSI B16.5 Alloy Orifice Flanges |
Alloy Steel Flange JIS Standard Flanges | alloy steel ring type joint flanges |
Alloy Steel Grade F9 Slip On Flanges | alloy flange |
alloy flange and fittings | alloy flanges and fittings |
alloy steel 12 point flange bolt | alloy steel blind flanges |
alloy steel collar flanges | alloy steel flange |
alloy steel flange material | A182 Alloy Steel Blind Flanges |
Grade F11 Alloy Steel Weld Neck Flanges | alloy steel flanges |
Alloy Steel Industrial Flanges | Alloy Steel RTJ Flange |
ASME SA182M Alloy Steel Class 300 Flange | Alloy Steel Grade Flat Flange |
ASTM A182 Alloy Steel EN 1092-1 Flanges | ASTM A182 Alloy Steel Pipe Flanges |
Alloy Steel Slip On Flanges | A182 Weld Neck Flange |
ANSI B16.5 Alloy Orifice Flanges | AS A182 Blind Flanges |
Alloy Steel Socket weld Flanges | alloy steel flange material |
Alloy steel lap joint flange | ASTM A182 WNRF Flanges |
Alloy Steel ASTM A182 Threaded Flanges | AS Socket Weld Flanges |
Alloy Steel Lapped joint Flanges | ANSI B16.5, B16.47, B16.48 Alloy Steel Forged Flanges |
A182 Chrome Moly Plate Flange | ANSI B16.5 Alloy Steel Forged Flanges |
ASTM A182 Alloy Steel DIN Flanges | F12 AS Ring Type Joint Flanges |
Alloy steel Slip on Flanges | Carpenter 20 Flanges |
ASTM Alloy Steel F11 Spectacle Blinds Flanges | Alloy Steel Loose Flanges |
ASTM A182 Alloy Long Weld Neck Flanges | Alloy steel flat face flanges |
Alloy steel lap joint flanges | Alloy steel long welding neck flanges |
Alloy steel plate flanges | Alloy steel raised face flanges |
ASTM A182 F11 Alloy Steel BLRF Flanges | A182 F12 Steel Weld Neck Flanges |
Bul Hanine Redevelopment,
Qatari Coastline, Qatar
Zuluf Field Expansion Project,
Arabian Gulf, Offshore Saudi Arabia (KSA)
Abu Dhabi Gas Distribution Network Pipeline Project,
Abu Dhabi, United Arab Emirates (UAE)
Dung Quat Refinery Project,
Quang Ngai, Vietnam
Bahrain Deep Gas Exploration Project, Manama, Bahrain
Al-Zour New Refinery Project,
Zour, Kuwait
Ennore Petrochemical Cluster Project (India), Chennai, India
Ophir Oil Field Development,
Offshore Peninsular, Malaysia
Khulud Tight Gas Project,
Yibal, Oman
Chevron Indonesia Deepwater Development Project,
Jakarta, Indonesia
Batangas LNG Terminal, Batangas, Philippines
KrisEnergy’s Cambodia Oil Project,
Cambodia, Thailand
Check Alloy Steel Flange Material Dimensions, Chromoly Alloy Threaded Flanges is quite cheaper in india because of the low cost of man hours. Our Alloy Steel Flanges Manufacturers in India comes with Minimum 5 Years of Warranty.