::  OUR PRODUCTS :: FOILS
PRODUCT RANGE:
BLISTER FOIL STRIP PACK FOIL

LIDDING FOIL

CIGARETTE FOIL
LIGHT GAUGE CONVERTER FOIL
 TRIPLE LAMINATE FOR PACKAGING
FOUR PLY PACKAGING CABLE WRAP
TAGGER FOIL HOUSE FOIL

LIGHT GAUGE CONVERTER FOIL

We are manufactures light gauge converter foil with the following general specification. The final product specifications made as per agreed contract with the customers.

FOIL MATERIAL:
Aluminium alloy AA-1200 or AA 1235 conforming to Aluminium Association.
Specification.

TEMPER:
Soft (fully annealed; ‘O’)

SURFACE:
One side matt and other side bright

WINDING:
Bright side out or dull side out.

THICKNESS:
0.007 mm, 0.008mm, 0.009 mm and 0.012 mm

THICKNESS TOLERANCE:
± 8% over nominal thickness.

 

PINHOLE COUNT:

FOIL THICKNESS (MM) AVERAGE PINHOLES (PER SQ. M) MAXIMUM
0.007
 400 700
0.008 200 500
0.009 <100 200
0.012 <50 150


On request, better pinhole count can be maintained.

WETTABILITY (SURFACE TENSION):
A to C or to withstand 68 to 72 dynes (i.e. 70 ± 2 dynes) on either face of foil.

STICKNESS:
Material shall fall freely on 1.5 m length load.

SPLICING:
Shall be made of smooth ultrasonic welding through out the web width.

NUMBER OF SPLICING
Average number of splices per roll shall not exceed 2 whereas maximum number of splices in a roll is 3 and the permissible frequency of occurrence will not exceed the limit shown below:
Consignment size having 3 splices
Maximum number of rolls
1-10 rolls
2
11-30 rolls
4
31-50 rolls
6
 
IDENTIFICATION OF JOINTS: All splice joints will be flag marked for easy identification.
CORE MATERIAL: Aluminium or Steel
CORE LENGTH & I.D.: Flush or Protruded with 76 mm (+/-0.5 mm), 102 mm (+1.5/-0.5 mm) or 152 mm ID (+2.5 / 0.5 mm)
REEL OD: 700 mm maximum
ROLL WIDTH: 950 mm maximum ± 1 mm.
FINNING: Finning caused by web misalignment shall not exceed 2 mm and shall not occur more than once in every three rolls
IDENTIFICATION: Each reel is identified with a ticket having reel number, specification, operator number and manufacturing date.
PACKING: Rolls individually wrapped, placed in top bottom combination wooden boxes with Silica Gel packets and making as specified by customer.
TEST CERTICATES: Test certificate incorporate (a) Thickness (b) Width (c) Wettability and (c) Number of joints. Any other information sought by the customer can also be given.

 
:: PRODUCT RANGE ::
>> Stainless Steel
>> Carbon Steel
>> Alloy Steel (Boiler Steel)
>> Nickel Alloys
>> Mild Steel
>> Monel, Inconel, Hastelloy,       Incoloy Alloys
>> Microwave Guides Straigh     Section & Comments (MOC)
>> Non Ferrous Metal
 [Copper, Brass, Aluminium, Phorous Bronze, Gun Metal, Zinc, Lead Etc.]
>> Aluminium Alloys & Extrusion
>> Aluminium Foils
 
:: TEC. INFORMATION ::
>> Stainless Steel Pipes/Plates
>> Alloy Steel Pipe/Plates
>> Carbon Steel Pipe/Plates
>> Non Ferrous Metal
>> Pipe Data
:: CALCULATOR ::
WEIGHT CALCULATOR

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
Site Design & Developed By : Mesotek