We are manufactures a range of hard Aluminium Foil suitable for blister packing of Pharmaceutical Products such as Tablet, Capsules, etc., with the following general specification. The final product specifications are made as per agreed contact with the customers. Standard Foil Gauge Options Tolerance ( +/-8% ) 0.020 mm +/- 0.0016mm 0.025 mm +/- 0.002 mm 0.030 mm +/- 0.0024 mm HEAT SEAL COATING: Colourless Vinyl Resin (option for tinted resin available) conforming to the applicable Government regulations regarding direct contact with medicines and drugs. The resin is suitable for heat sealing to PVC/PVDC coated PVC films.

COATING THICKNESS OPTIONS:
(a) 4-6 GSM with a tolerance of +/- 0.5 GSM
(b) 6-8 GSM with a tolerance of +/- 0.5 GSM Standard, if not specified, heat sealing coating GSM is 4 with a tolerance of +/- 0.5.

SEAL STRENGTH WITH PVC/PVDC: 8 N/25 mm min.

PRINTING AND LACQUER COATING: Printed as per text, layout and shade approved by customer. For non-printed specification, clear lacquer to be coated as a protective coating and good printability. Printing inks and lacquer coatings are capable to withstand 180 deg. C for 1 sec. dwell time.

CONFIGURATION: Printed and Unprinted Blister Foils are available in the reel forms. Unprinted blister foils are also available as Jumbo roll.